Product Videos
Top of Products > Product Videos
How to install the Cap Kit on FX-600/601, which protects a soldering iron tip from shock on the move.
Troubleshooting Guide for FV-310
Procedure of measuring the resistance value of the heating element.
Correct procedures for measurement, positioning of the tip, and life span of sensor.
Correct procedures for measurement, positioning of the tip, and life span of sensor.
Correct procedures for measurement, positioning of the tip, and life span of sensor.
Easy to rework solder joint with desoldering wire.
All the parameters will be shown in the video.
A very convenient function as to register up to 5 frequently used temperatures.
Easy temperature setting with only two buttons.
Temperature display can be easily changed between C and F.
The key to a good soldering is pre-tinning the lead wire.
The key to a good soldering is knowing when to remove the solder.
The key to a good soldering is knowing how to feed the solder.
Blowing hot air (for approx. 30 sec.) at the point you want to bend will soften the plastic and make it easy to bend.
It requires only a screwdriver to replace heating element.
The hook curve circulates the hot air, so the entire tube can be shrunk quickly.
How to get wrinkles out of film
Use settings suited to sheath material to ensure clean removal.
Fine adjustments of tip temperature to match the set temperature.
For times when the buzzer isn't required at the worksite.
It is easy to replace a tip even if it is securely locked in place.