HAKKO

Products

Search

Lineup

Top of Products  >  Static Control Auto-Soldering System Soldering Iron Desoldering / Rework Preheater Soldering Pot Thermometer / Soldering Tester Fume Extractor Solder / Flux Static Control Tool for Lead and Wire Shrink Packaging / Heating Gun Glue Gun / Sealer Hobby  >  Static Eliminator  >  FE-510

Static Control/Static Eliminator

FE-510

FE-510
POINT
  • Static eliminator that allows the selection of area intended for static neutralization
  • Locking mechanism maintains angle of eliminator unit
  • Error output signal function is useful to incorporate the unit into line applications

Available in:

  • Japan
  • North America
  • Europe
  • Oceania
  • Asia
  • Other Countries

FE-510

Specifications

Model No. FE-510
AC adapter output/Capacity DC 24 V 10 VA
Discharge method High frequency AC method
High voltage output AC 2,000 V approx.
Ion balance ±10 V or less
Static elimination time Straight louver : approx. 1.5 seconds
Wide-angle louver : approx. 2.5 seconds
High voltage abnormality output (ALARM) MOS FET relay non-voltage contact output
Maximum current : 100 mA
Applied voltage : DC 30 V or less
Cleaning check output (C.C) MOS FET relay non-voltage contact output
Maximum current : 100 mA
Applied voltage : DC 30 V or less
Air flow 1.5 to 3.0 m3/min.
Air flow out angle Vertically 360° variable (every 10°)
Amount of generated ozone 0.04 ppm or less
Operating environment Ambient temperature / humidity range : 0 to 40°C, 15 to 65% (without condensation)
Material for discharge needles Tungsten
Dimentions 150 (W) × 182 (H) × 50 (D) mm (without stand)
Weight Approx. 0.79 kg
 

AC Adapter

AC adapter output/Capacity DC 24 V 1 A
Dimensions 34 (W) × 72 (H) × 51 (D) mm
Weight Approx. 100 g

  • Weight is measured with stand.
  • Typical value measured (before shipment) at a distance of 300 mm from the center of the fan outlet with the maximum flow rate.
  • Quantity of produced ozone measured at a point 150 mm away from the center of the fan outlet.