Products

Desoldering / Rework/SMD rework system /Jig

HAKKO FR-803B

HAKKO FR-803Bイメージ

Available in:

  • Japan
  • North America
  • EU
  • Oceania
  • Asia
  • Other Countries
  • LEAD FREE
  • ESD SAFE
  • RoHS
  • All-in-one digital high-end rework station
  • 3-step temperature profile (preheating - heating - cooling down) is available
  • Vacuum function facilitates the pickup of workpieces
Contact Us
Catalog
Manuals / MSDS / Engineering documents
  • Features
  • Packaging List / Specifications
  • Soldering Tip / Nozzle
  • Replacement Parts / Option
  • Maintenance

Features

Rework System blowing hot air at MAX 500°C
Enables to combine with Preheater (HAKKO FR-820)
Upgraded power MAX 500°C/930°F for lead-free soldering
Upgraded working efficiency combined with Preheater (HAKKO FR-820)
·Operating HAKKO FR-820 with buttons of FR-803B
·Shorten operating time by heating SMD components from top and bottom
·Automatically cool down after turning off the power
·Easy attachment with included connecting cord
3-Step Temperature setting
·Protect SMD components by setting temperature and time on Step 1-3(Set range Temperature:100 to 500°C/200 to 930°F, Time: 0 to 300 sec. (0 to 5 minutes))
·Automatic cool-down function works after Step 3(at AUTO Mode)
·Enables to register 50 profile data
-AUTO Mode allows control temperature, air-flow, and time.

Profile graph of 3-Steps
Profile graph
Vacuum pickup is built-in
Vacuum
Pad Material Conductive silicone rubber
Heatproof temperature Approximately 180ºC
Replacement time When heat deforms it.
Comes with an offset function
Power saving function(30min/60min/∞ can be selected)
Card lock function to lock the setting details
ESD safe by design
Control hot air temperature with Temperature Probe (equipped with HAKKO FG-101, HAKKO FG-100)
Controlling the temperatures of Hot Air Rework System and workpiece using the Temperature Probe
Measure temperatures of Hot Air Rework System and workpiece using the Temperature Probe for Hot Air Rework System (No. C1541) and thermometer (HAKKO FG-100/HAKKO FG-101) to protect the workpiece.
  Controlling the temperatures of Hot Air Rework System
 
Replacement parts for Temperature Probe for Hot Air Rework System(No. C1541)
How to Use the Temperature Probe for Hot Air Rework System(No. C1541)
 
Setting example 1 Setting example 2 Setting example 3
Setting example 1 Setting example 2 Setting example 3

Usage/Applications

How to use

When should the optional Temperature Probe for Hot Air Rework System(No. C1541) be used?
The Temperature Probe for Hot Air Rework System (No. C1541) is equipped with 2 types of sensors. Before measuring temperatures as follows, connect the sensor to the thermometer.
Sensor A: When measuring the temperature of hot air blown from the nozzle:
Correcting thermal control can be made by confirming the temperature of the hot air that is actually blown.
Sensor B: When measuring the temperature of applicable parts (workpieces):
Rework can be performed without causing damage to the parts being reworked (QFP, etc.)
How to Use the Temperature Probe for Hot Air Rework System(No. C1541)

Do Hot air blowers / Preheaters enable heat-shrink tubing to shrink?
Hot air blowers or preheaters (bottom heaters) for rework are also suitable for shrinking heat-shrink tubing in addition to chip repair work.
Another use for hot air blowers and preheaters