Lineup
Soldering Iron/Station Type
LIMITED STOCK
Available in:
This product is discontinued in some markets, but still available in other markets.
Please check availability with your local distributors.
Even if the product is discontinued in your searched markets, replacement parts and consumable parts are still available.
| Discontinued Model | Succeeding Model |
|---|---|
| FX-888D |
|
Heater output has been increased by 30% compared to that of the conventional models HAKKO 936/937. Also FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity.
This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life.
Rise time to 350°C is 20 seconds faster and tip temperature drop is reduced during continuous work.
Able to shorten the time required for the same work and improve work efficiency significantly.
Compact station body requires a space of only 100 (W) × 120 (D) mm. What's more, points that come into contact with the floor are positioned as close to the outer edge of the body as possible to improve stability and make the station difficult to fall over.
With only two operation buttons of UP and ENTER in the center, operation is simple and easy. Even if you're not familiar with operation of machines, you can operate it without difficulty.
An iron holder of the same color of a soldering station comes as a set. The highly functional iron holder not only improves ease of use, but also brings a sense of visual consistency to the work environment.
Silver:Soldering station
Silver:Iron holder
Blue & yellow:Soldering station
Blue & yellow:Iron holder
The FX-888D's digital display makes it easy to check the set temperature at a glance.
Settings can be locked using a password to prevent them from being changed unexpectedly. Of course, it is possible to restrict all setting changes or prevent users from switching to particular modes. It allows you to choose a style of usage best suited for your worksite.
This feature is very convenient when you want to change the set temperature to suit a particular workpiece, component, or tip shape. Simply select the desired temperature from a selection of preset temperatures registered in advance. (Up to 5 preset temperatures can be registered.) Preset mode can save your trouble and improve workability.
Temperature adjustment* is an essential part of any strict quality control system. With adjustment mode, what used to be a troublesome procedure is now as simple as entering the measured tip temperature to FX-888D.
Measuring tip temperature with a tip thermometer (FG-100B)
A space-saving N2 system. Anti-oxidation and pre-heating significantly improve solderability.
Soldering station, Iron holder, N2 gas generator, and N2 flowmeter must be purchased separately.
Soldering station and Iron holder must be purchased separately.
Soldering station, cap, and Iron holder must be purchased separately.
Soldering station and Iron holder must be purchased separately.
1. Press the slide lock button inward.
Press it firmly from upward.
It is easy to open by the slide lock sloping inward.
2. Open the iron holder base while pressing the slide lock.
3. Remove the solder waste in the bottom plate.
