 |
 |
|
|
|
|
|
|
|
|
|
|
 |
|
| For repair of surface-mounting
P.W.B. |
|
Enables to set High Temperature and greater increase in power (MAX Temp. 500°C/930°F)*
*The temperature of hot air varies with the nozzle shapes, measuring points etc..
|
|
|
Outlet nozzle featuring new
mechanism
· Consistent temperature of hot air is allowed by new mechanism.
 |
|
|
Featuring airflow meter
· Easy to control the airflow volume visually.
|
|
Automatic cool-down function
· To avoid the heater damage, the cooling begins automatically when the power
to the heater is shut off. The air stops blowing after cool-down.
|
|
Compact design |
|
|
ESD safe by design. |
|
Controlling the temperatures of Hot Air Rework System and workpiece using the Temperature Probe
Measure temperatures of Hot Air Rework System and workpiece using the
Temperature Probe for Hot Air Rework System (No. C1541) and thermometer
(HAKKO FG-100/HAKKO FG-101) to protect the workpiece.
|
| |
 |
| |
|
| |
|
|
| Part No. |
Packing List |
| No.FR801 |
Main Unit (HAKKO FR-801 Station), Handpiece
Holder, Power Cord, FP Pick-up, FP Pick-up Wire (S / L), Instruction Manual:
1pc each |
| NOTE: |
This product does not include a nozzle. When purchasing this product, be sure to order a nozzle suitable for the work. |
| Power Consumption |
100V-310W,110V-360W,120V-430W,220V-570W,
230V-630W,240V-680W |
| Capacity |
5 to 20L/min (Max.) |
| Hot Air Temperature |
100 to 500ºC/200 to 930ºF (Nozzle A1130 used)
|
| Outer Dimensions (Station) |
160(W) x 145(H) x 230(D)mm |
| Length (Handpiece) |
185(L) mm (w/o cord) |
| Weight (Station) |
4kg |
| Weight (Handpiece) |
115g (w/o cord) |
|
| Part No. |
Name |
| B1438 |
FP Pick-up (with two wires) |
| B1439 |
FP Pick-up Wire (S) |
| B1440 |
FP Pick-up Wire (L) |
| Optional
nozzles for Hakko 850/850B/852/FR-801/FR-802/FR-803B |
|
 How to use
 |
When should the optional Temperature Probe for Hot Air Rework System(No. C1541) be used? |
| The Temperature Probe for Hot Air Rework System (No. C1541) is equipped with 2 types of sensors. Before measuring temperatures as follows, connect the sensor to the thermometer. |
| Sensor A: |
When measuring the temperature of hot air blown from the nozzle:
Correcting thermal control can be made by confirming the temperature of the hot air that is actually blown.
|
| Sensor B: |
When measuring the temperature of applicable parts (workpieces):
Rework can be performed without causing damage to the parts being reworked (QFP, etc.)
|
|
|
|
|
|
|
|
What's lead-free?
What's ESD-SAFE?
What's European RoHS?
