HAKKO

Search

Lineup

Top of Products  >  Static Control Auto-Soldering System Soldering Iron Desoldering / Rework Preheater Soldering Pot Thermometer / Soldering Tester Fume Extractor Solder / Flux Static Control Tool for Lead and Wire Shrink Packaging / Heating Gun Glue Gun / Sealer Hobby  >  Vacuum Pick-Up Tool  >  394

Static Control/Vacuum Pick-Up Tool

394

394
POINT
  • Battery-powered suction pick-up tool with built-in vacuum pump
  • Max. pick-up suction capacity is 120 gf
  • Antistatic material is used

Available in:

  • Japan
  • North America
  • Europe
  • Oceania
  • Asia
  • Other Countries

394

Cordless suction pick-up tool

Ultra-compact high powered pump eliminates need for a power cord and an air tube.

Continuous suction allows easy handling of objects.

Soft touch switch

Pen-type body is easy to fit into your hand.

Utilizes antistatic material

Nozzle with a stopper

  • The stopper prevents the nozzle nib from shooting through the pad, damaging components, and causing suction failures.

Application

  • Semiconductor-related works
  • Pick-up of SMDs
  • Surface mount PCB assembly
  • Conveyance of ICs

Examples of nozzle and pad combinations and suction power

Image of combination Nozzle Pad Maximum suction power
A1165 A1166
3 mm dia.
6 gf
(option)
A1312
5 mm dia.
40 gf
A1167
7 mm dia.
80 gf
(option)
A1311
10 mm dia.
120 gf
A1486 A1166
3 mm dia.
6 gf
(option)
A1312
5 mm dia.
40 gf
A1167
7 mm dia.
80 gf
(option)
A1311
10 mm dia.
120 gf
  • A1165 and A1486 are the only applicable nozzles to the pads.
  • The maximum suction power varies depending on the surface of the object.

Nozzle single use

Nozzle Maximum suction power Application Mark *2
Bent nozzle A1164
0.4 mm dia.
Bent Nozzle
option
0.6 gf Chip resistors, other tiny components 「22」
Bent nozzle A1198
0.26 mm dia.
Bent Nozzle
option
0603 chip 「25」

Above 2 nozzles can be used without pad.

  • How to distinguish each nozzle

How to use/Applications

Comfortable for long-term work

Just mate the suction pad closely with the surface of the object you wish to pick up, and press the button to turn on the suction. This simple and easy action makes long-term operation comfortable.

Pick up of 0603 chip component with a bent nozzle

The 0603 components used in mobile phones are so small that high precision work is required when picking it up with manual tweezers not to lose or miss it. HAKKO 394 offers a fine bent nozzle (A1198 0.26 mm dia. as an option) that can handle the 0603 chip component. HAKKO 394 ensures continuous pick up works.

With the bent nozzle accessory, 0603-size components can be suctioned.

With the best suited pad selectable from a wide variety of pads, delicate bulb-shaped components can be safely picked up

Four types of pads in sizes of 3 mm dia., 5 mm dia., 7 mm dia. and 10 mm dia. respectively are available for HAKKO 394.
Suction pick up can be continuously and easily performed only by matching the pad to the size of the suction object.
Also, the stopper function of the HAKKO 394, which is enabled when a pad is used, prevents the suction object from being damaged.

Bulb-shaped objects also can be suctioned

The pick-up tool is designed to pick up a micro-component by suction but not to suction dust. If it is used to suction dust, the filter inside may get clogged and it may cause product failure.