Products

Soldering related equipment and materials/Vacuum pick-up tool

HAKKO 394

HAKKO 394イメージ

Available in:

  • Japan
  • North America
  • EU
  • Asia
  • Other Countries
  • Battery-powered suction pick-up tool with built-in vacuum pump
  • Max. pick-up suction capacity is 120gf
  • Antistatic material is used
Contact Us
Catalog
Manuals / MSDS / Engineering documents
  • Features
  • Packaging List / Specifications
  • Soldering Tip / Nozzle
  • Replacement Parts / Option
  • Maintenance

Features

Cordless suction pick-up tool
Ultra-compact high powered pump eliminates need for a power cord and an air tube.
Continuous suction allows easy handling of objects.
Soft touch switch
Pen-type body is easy to fit into your hand.
Utilizes antistatic material
Nozzle with a stopper
· The stopper prevents the nozzle nib from shooting through the pad, damaging components, and causing suction failures.


 Intended works
Semiconductor-related works
Pick-up of SMDs
Surface mount PCB assembly
Conveyance of ICs

Contents of HAKKO 394 set
The pick-up tool is designed to suck up micro components used for PCBs, etc. and not to absorb dust. If used to absorb dust, it may become inoperable due to the clogging of filters mounted inside.

Specifications of pad
Material Electrically conductive silicone rubber
Heatproof temperature Approximately 150°C
Resistance value 104Ω to 106Ω
Indication of pad replacement When any crack or tear is found during a visual check, or objects cannot be sucked up effeciently

 Nozzle Single Use
Nozzle Applications
Part No. Name/Descripation Shape Stamped*
A1164 Bent nozzle /0.4mm
(OD 0.7mm)
Bent Nozzle 22 Chip resistors, other tiny components
A1198 Bent nozzle
/0.26mm
(OD 0.5mm)
Bent Nozzle 25 Usable for 0603 chip
*Only these 2 shapes are avilable for single use.


 Use Nozzle with Pad
Nozzle
Part No. A1165 A1486
Name/ Description Bent nozzle /1.1mm Straight nozzle /1.1mm
Outside
Diameter
1.65mm 1.65mm
Figure
Bent Nozzle Straight Nozzle
+ + + +
Pad
Part No. A1166 A1312 A1167 A1311 A1166 A1312 A1167 A1311
Name/
Description
Pad
/o3
Pad
/o5
Pad
/o7
Pad
/o10
Pad
/o3
Pad
/o5
Pad
/o7
Pad
/o10
Figure Pad Pad Pad Pad
Pick-up Performance 6gf 40gf 80gf 120gf 6gf 40gf 80gf 120gf
Set Examples
(using 392 as an example)
Set Example 1 Set Example 2 Set Example 3 Set Example 4
*The pick-up performance shown above slightly differs depending on the surface of the object.

Usage/Applications



With the bent nozzle accessory, 0603-size components can be suctioned.
With the bent nozzle accessory, 0603-size components can be suctioned. 0603-sized chip resistors are extreme micro-components that are often incorporated into devices such as mobile phones.
If they are manually picked up with tweezers, it requires high-precision manual dexterity so that they will not be flicked and lost.
For the HAKKO 394, a very fine bent nozzle with 0.26mm hole diameter (A1198) which can be used for 0603-sized components is available. The nozzle ensures safe pick-up operation in continuous suction mode.


With the best suited pad selectable from a wide variety of pads, delicate bulb-shaped components can be safely picked up
Four types of pads in sizes of φ3, φ5, φ7 and φ10 respectively are available for HAKKO 394.
Suction pick up can be continuously and easily performed only by matching the pad to the size of the suction object.
Also, the stopper function of the HAKKO 394, which is enabled when a pad is used, prevents the suction object from being damaged.
Bulb-shaped objects also can be suctioned.