Support

Maintenance / Troubleshooting / Application Examples

 HAKKO FM-101

How to measure the soldering tip temperature

How to measure the soldering tip temperature

1. Press the SELECT button to change the mode display to "TEMP".
When the soldering tip does not contact the sensor, the display shows the room temperature.

2. Put fresh solder on the tip.

3. Place the tip on the temperature measuring point of the sensor.

Place the tip on the temperature measuring point located in the center of sensor.
* The way to place the tip on the sensor varies depending on the shape of the tip.


The way to place the tip on the sensor varies depending on the shape of the tip.

4. Wait until the displayed value is stable and read it.

It is not necessary to deduct the room temperature that was displayed when the power was turned ON from the measured temprature. The temperature appearing on the LED display is the actual measured value.