Support

Home
Support
Maintenance / Troubleshooting / Application Examples
HAKKO DASH/455/456 : Day-to-day maintenance and troubleshooting

Maintenance / Troubleshooting / Application Examples

Maintenance Method for
DASH/455/456 Soldering Irons


HAKKO DASH	HAKKO 455/456

Tips for extending the life of the soldering iron

If a failure phenomenon occurs

For extending the life of the soldering iron	Point 1	Pull out the plug from the wall socket if not using the soldering iron for a long time.
	Point 2	If consumable parts such as the element cover, nut, etc. are oxidized, replace them with new parts.
	Point 3	When placing the soldering iron on the iron holder during work, leave the tip applied solder.
	Point 4	After work, be sure to apply new solder to the tip before storing.
	Point 5	To prevent burning on, periodically loosen the nut and repeatedly insert and pull out the element cover and tip.
	Point 6	Use only the specified tips.

If a failure phenomenon occurs	Case 1	The tip is not heated sufficiently.
	Case 2	A new tip cannot be inserted into the heating element.

Maintenance /
Troubleshooting /
Application Examples

Discontinued Products

2011.12/19Best suited for soldering of IC/LED and PWB The function of a soldering station condensed into one handle! HAKKO FX-600
2011.12/19Suitable to solder chassis,large connector,transformer,etc. which require a large amount of heat The function of a soldering station condensed into one handle! HAKKO FX-601
2011.11/14HAKKO375 can groove Φ0.3mm solder dia. New specification for HAKKO375