TOP > Product Tips > Maintenance Method for DASH/455/456

Maintenance Method for
DASH/455/456 Soldering Irons
If a failure phenomenon occurs
Tips for extending the life of the soldering iron

Top page for Maintenance Method for DASH/455/456 Soldering Irons
Case 1 The tip is not heated sufficiently.
Case 2 A new tip cannot be inserted into the heating element.

Case 2. A new tip cannot be inserted into the heating element.
The insert pipe is burned onto the heating element.
Flux that entered the tip caused the parts to burn together. In general, the insert pipe is not easily pulled out.

*A simple operation after soldering work can prevent burning on. Refer to Point 5.
Appearance when the insert pipe is burned on
Note

Remove the insert pipe with a tool, etc.
Do not reuse the insert pipe by returning it to the tip again. Doing so will prevent the tip from being heated sufficiently.

Necessary tool:   Long-nosed pliers


If the insert pipe cannot be removed even by using the tool

Replace the heating element and tip at the same time.
Top of page
PRIVACY POLICY | SITE MAP