Top of Products  >  Glue Gun / Sealer Auto-Soldering System Soldering Iron Solder Feeder Thermometer / Soldering Tester Tip Cleaner / Iron Holder Solder / Flux Fume Extractor Soldering Pot Desoldering / Rework Rework Station Static Control Vacuum Pick-Up Tool Tool for Lead and Wire Heating Machine / Heating Gun Glue Gun / Sealer Hobby  >  Sealer  >  FV-802

Glue Gun / Sealer/Sealer


  • Compact portable sealer functioning both as adhesion heater and as cutting heater
  • Compact design makes it suitable not only for home use but also for business use

Available in:

  • Japan
  • North America
  • Europe
  • Oceania
  • Asia
  • Other Countries


Featuring both sealing and cutting with a single unit

Sealing width 1.6mm, length of 200mm, acceptable thickness total 0.2mm

HAKKO FV-801 is applied sealing length of 350mm.
HAKKO FV-803 is compact and available for max. thickness 0.4mm.

HAKKO FV-802 can be used for sealing or cutting depending on the application.

Applicable to various fields

Perfect sealing is enabled by a simple operation.



Operating Procedure

Procedure 1

Set the heating time adjusting knob according to the material and thickness of the package film, and adjust the sealing position.

Procedure 2

Push down the handle. For approximately 2 seconds, recommendable knob position is 6.



Procedure 3(for Cutting)


Procedure 3 (for Adhesion)

After the red pilot lamp turns off, wait for a cooling time of 1 to 2 seconds and then raise the handle.

Heating adjustment table (for sealing)

Material Polyethylene High-Temperature Film (polypropylene, etc.)
Scale 1


Scale 2 0.06mm or less  
Scale 3 0.10mm or less 0.04mm or less
Scale 4 0.20mm or less 0.06mm or less
Scale 5 - 0.08mm or less
  • The above thickness indicates total thickness of two or more films.
  • The above table lists standard values. The thickness varies depending on the material and voltage. Select the optimum setting.