Products

Lineup

Top of Products > Fume Extractor Auto-Soldering System Soldering Iron Desoldering / Rework Preheater Soldering Pot Thermometer / Soldering Tester Fume Extractor Solder Static Control Tool for Lead and Wire Shrink Packaging / Heating Gun Glue Gun / Sealer Hobby > Air-Purifying Type > FA-430

Fume Extractor/Air-Purifying Type

FA-430

FA-430

About "ICON"

POINT

HEPA filter (High Efficiency Particulate Air Filter)
Filters out 99.97% of particles greater than 0.3μm
Recommended for quiet laboratory and office

Available in:

FA-430

Option

	Part No.	Name	Specifications
	C1571	Duct set	With rectangular type nozzle
	C1572	Duct set	With round type nozzle
	B3642	Duct	55mm dia. x 1.2m
	B3620	Adapter
	B3621	Adapter	For 3 inch
	B3622	Nozzle/rectangular type
	B3623	Nozzle/round type
	B3625	Net	Qty: 5
	B2410	Duct	75 mm dia. × 2 m
	B2416	Duct band	Qty: 2
	B2418	Bench top plenum/clear

When using an independent duct

Part No.	Part Name	Notes
B3642	Duct	Φ55×1.2m
B3620	Adapter	For attaching duct to main unit.

Choose from one of 2 types of nozzles for the independent duct.

Part No.	Part Name	Notes
B3622	Nozzle, rectangular	For absorbing smoke from the side.
B3623	Nozzle, round	For absorbing smoke from above.
B3625	Net [qty:5]	For preventing contaminants from being absorbed. (Mesh dimensions: Approx. 10 mm × 10 mm)

When using a bench top hood

The benchtop hood detailed below requires the separate purchase of a different sized duct, duct band, and 3-inch adapter.

Part No.	Part Name	Notes
B2418	Benchtop hood	For preventing smoke from escaping upwards without being affected by air conditioning. *Requires 75mm dia.duct, duct band (B2416), and 3-inch adapter (B3621) separately.
B2410	Duct	Required when using benchtop hood. *75mm dia. x 2m. Not freestanding.
B2416	Duct band	Required when using benchtop hood.
B3621	Adapter (for 3-inch duct)	Required when using benchtop hood and 75mm dia. duct.