HAKKO

Products

Search

Lineup

Top of Products  >  Auto-Soldering System Auto-Soldering System Soldering Iron Desoldering / Rework Preheater Soldering Pot Thermometer / Soldering Tester Fume Extractor Solder / Flux Static Control Tool for Lead and Wire Shrink Packaging / Heating Gun Glue Gun / Sealer Hobby  >  Auto-Soldering Robot System  >  HU-100/HU-101

Auto-Soldering System/Auto-Soldering Robot System

HU-100/HU-101

HU-100/HU-101
POINT
  • A smart way to build an Auto-soldering system at lower cost
  • HAKKO original Easy Programming Software as standard
  • A set of accessories for mounting as standard

Available in:

  • Japan
  • North America
  • Europe
  • Oceania
  • Asia
  • Other Countries

Specifications

Soldering robot system

Power consumption 290 W
Stroke X axis : 400 mm
Y axis : 400 mm
Z axis : 150 mm
θ axis : ±200 degrees
Payload capacity X axis : 20 kg (jig table)
Speed X/Y axis : 1 to 800 mm/sec. Z axis : 1 to 400 mm/sec.
θ axis : 1 to 600 degrees/sec.
Positioning repeatability X/Y/Z axis : ±0.02 mm, θ axis : ±0.01 degree
Motor type Stepping motor
Number of program 10 programs
Max. 240 points/program
Number of soldering condition 100 conditions for PS (Point soldering) mode
100 conditions for DS (Drag soldering) mode
Soldering tip TX1 : 140 W, TX2 : 300 W
Air Not required
Operating environment Ambient temperature/humidity range 0 to 40℃,
85% or less RH (without condensation)
Dimensions 601 (W) × 934 (H) × 747 (D) mm
Weight 50 kg

Programming software

Compatible OS Windows 7、Windows 8/8.1、Windows 10
Computer and compatible keyboard Personal computer which runs on Windows OS
and its compatible keyboard
Media reading drive CD-ROM drive
Supported robot Exclusive for TTA-A4 series robot made by IAI
USB port Necessary to run Easy programming software
Note * Multiple connection methods between table-top type robot (IAI-made TTA-A4 series) and PC are available.
However, when connecting to PC from the USB connector on the front side of the table-top type robot (IAI-made TTA-A4 series), it cannot be used under Windows 10 environment.
* The specification of the robot is HAKKO original.
Please contact HAKKO when necessary.

Solder feed unit

Model No. FU-500
Power consumption 35 W

 

Station

Usable solder diameter 0.3, 0.5, 0.6 (0.65), 0.8, 1.0, 1.2, 1.6 mm dia.
Dimensions 145 (W) × 100 (H) × 230 (D) mm
Weight 2.3 kg
 

Feeder unit

Weight 800 g
  • Total length and weight are measured without cord.
  • Weight of feeder unit is the maximum value which is measured with solder feed pulley unit, solder feed guide and fluoroplastic tube.

Soldering iron unit

Model No. FU-601
Power consumption 140 W / 300 W
Temperature range 50 to 500℃
Temperature stability ±5 at idle temperature

Station

Output power AC 29 V
Dimensions 145 (W) × 107 (H) × 211 (D) mm
Weight 4 kg

Soldering Iron

Power consumption 260 W (29V)
Tip to ground resistance ＜2 Ω
Tip to ground potential ＜2 mV
Cord length 5 m
Total length 168 mm (with TX2-XD4 tip, dimension can be adjusted within a ±5 mm range.)
Weight 134 g (with TX2-XD4 tip)
173 g (with TX2-XD4 tip and iron unit fixing assembly)
  • Total length and weight are measured without cord.
  • FU-6002 L type is attached as standard.