HAKKO

Search

Lineup

Top of Products  >  Tool for Lead and Wire Auto-Soldering System Soldering Iron Desoldering / Rework Preheater Soldering Pot Thermometer / Soldering Tester Fume Extractor Solder / Flux Static Control Tool for Lead and Wire Shrink Packaging / Heating Gun Glue Gun / Sealer Hobby  >  Thermal Wire Stripper  >  FT-802

Tool for Lead and Wire/Thermal Wire Stripper

FT-802

FT-802
POINT
  • Thermal wire stripper for higher quality and more preciseness
  • Even very fine AWG 38 can be stripped with standard blades

Available in:

  • Japan
  • North America
  • Europe
  • Oceania
  • Asia
  • Other Countries

Thermal wire stripper for higher quality and more preciseness

More sharp, precise, and effective

Thermal wire stripper FT-802 enables higher quality and more precise insulation stripping.
The performance that can strip insulation with no nick can meet the requirement of the latest aerospace industry and the medical industry that require s very high quality.

Thermal strip gives great sharpness.

  • FT-802 can strip the insulation of AWG 38 wire with no nick.

    FT-802
  • Conventional wire stripper could make ragged edges of insulation or damage strands.

Due to the tweezers structure, the cutting edges are always aligned.

The blades can be securely fixed by making the frame with tweezers structure.

Due to the tweezers structure, the cutting edges are always aligned.

Even very fine AWG 38 can be stripped with standard blades.

Even very fine AWG 38 can be stripped with standard blades.

Blades are replaceable and a handpiece can be saved.

No need to replace a handpiece when blades get worn out.
Blades can be easily replaced by using the hex-wrench (included in the unit) and the blade removal plate.

  •  The blades must be cool before replacement for safety.

Blades are replaceable and a handpiece can be saved.

Space saving by the integration of station and holder

Space saving by the integration of station and holder

Output setting by the unit of 5%. Easy to set optimum output level as per material.

Output setting by the unit of 5%. Easy to set optimum output level as per material.

User-friendly display

Status of a handpiece at glance on the display.
User-friendly design for reduction of stress during the work.

  • A handpiece is correctly set in a holder.
  • Same as the output value
  • Ready to work immediately
  • Auto sleep function will activate after passing the set time.
FT-802
  • Auto sleep function is running.
  • Save output value approximately by 50%
  • Reduce blade oxidation and load on heating elements
  • Time to activate auto sleep function can be set by the unit of 1 minute (up to 30 minutes).

Option blade can handle even very thick cables

FT-8003 can strip insulation off thick leads that FT-8002 could not.

FT-800

If cut with a knife blade

It is not recommended to use a knife blade for cable stripping due to the high risk of cutting in the conductor or fraying shield that can result in ruining the cable.

knife cutter