HAKKO

Products

Search

Lineup

Top of Products  >  Tip Cleaner / Iron Holder Auto-Soldering System Soldering Iron Solder Feeder Thermometer / Soldering Tester Tip Cleaner / Iron Holder Solder / Flux Fume Extractor Soldering Pot Desoldering / Rework Rework Station Static Control Vacuum Pick-Up Tool Tool for Lead and Wire Heating Machine / Heating Gun Glue Gun / Sealer Hobby  >  Maintenance Kit  >  FS-100

Tip Cleaner / Iron Holder/Maintenance Kit

FS-100

FS-100
POINT
  • Chemical paste best suited for the removal of oxidation on soldering iron tips
  • Also used for retinning of soldering tips

Available in:

  • Japan
  • North America
  • Europe
  • Oceania
  • Asia
  • Other Countries

FS-100

Chemical Paste

For retinning soldering tips

For oxidation removal on soldering tips

Cleaning procedure

  • Use FS-100 in combination with FT-700 for enhanced effectiveness.
  • Do not use the chemical paste for purposes other than restoring of the soldering tip.
  • Oxidized tip
    Oxidized tip
  • Re-tinning is now completed.
    Re-tinning is now completed.

The suitable temperature for cleaning is around 350°C.

  1. Tin the tip with the chemical paste FS-100 (to remove oxides).
    Tin the tip with the chemical paste FS-100.
  2. Wipe out the chemical paste FS-100 left on the tip with a cleaning sponge or cleaning wire.
  • Wipe out the chemical paste FS-100 left on the tip with a cleaning sponge or cleaning wire.
  • Wipe out the chemical paste FS-100 left on the tip with a cleaning sponge or cleaning wire.
  1. Feed solder to the tip and see whether or not solder wets on it.
    Feed solder to the tip and see whether or not solder wets on it.
  2. Repeat the above steps of 1 to 3 until solder wets on the tip surface.
  3. If solder wets on the tip surface again, feed enough solder to cover the tip to prevent oxidation at the end.