HAKKO

Products

Search

Lineup

Top of Products  >  Soldering Iron Auto-Soldering System Soldering Iron Desoldering / Rework Preheater Soldering Pot Thermometer / Soldering Tester Fume Extractor Solder / Flux Static Control Tool for Lead and Wire Shrink Packaging / Heating Gun Glue Gun / Sealer Hobby  >  Ceramic Heater Type  >  PRESTO

Soldering Iron/Ceramic Heater Type

PRESTO

PRESTO
POINT
  • Boost switch can immediately raise power from 20W in normal operation mode to 130W, enabling high-speed heatup
  • The HAKKO Presto can be used for a wide range of applications from simple repair of electric appliances to soldering of large components such as transformers
  • Supplied heat-resistant element cover makes it ideal for onsite servicing and repair

Available in:

  • Japan
  • North America
  • Europe
  • Oceania
  • Asia
  • Other Countries

130 W high-speed heatup with a boost switch

20 W when used in normal operation, but can be heated up to 130 W when the boost switch pressed.

Press the boost switch when a large amount of heat is temporarily required; for example, when quick heatup is needed (the unit becomes ready to solder within around 20 sec.) or when soldering relays and connectors.

The boost switch can be used for up to 30 continuous seconds.

Models with useful caps are also available (No.984 and No.985).

No.984/985 are not available in North America.
No.980/981 are not available in Japan.

  •  

    The models with caps that facilitate their storage are also available in the Soldering Iron HAKKO PRESTO Series.

  • 984/985 (When capped)

    The models with caps that facilitate their storage are also available in the Soldering Iron HAKKO PRESTO Series.

  • 980/981 (Without Cap)

    980/981(Without Cap)