Top of Products > Desoldering / Rework Auto-Soldering System Soldering Iron Solder Feeder Thermometer / Soldering Tester Tip Cleaner / Iron Holder Solder / Flux Fume Extractor Soldering Pot Desoldering / Rework Rework Station Static Control Vacuum Pick-Up Tool Tool for Lead and Wire Heating Machine / Heating Gun Glue Gun / Sealer Hobby > Desoldering Tool > FR-400
Desoldering / Rework/Desoldering Tool
Suction starts 0.2 seconds after pulling the trigger for instance and high pressure suction to achieve complete desoldering.
Improved heating ability and ACF* ensure suctioned solder be carried to filter pipe and reduce solder clogging.
It is important to heat a land of PWB and a component lead with a nozzle at the same time when desoldering.
Selection of the right nozzle shape is critical to ensuring the quality of work. Inappropriate nozzles can decrease work efficiency and damage PWB.
The nozzle lineup for FR-400 covers a variety of desoldering works, such as large DIA leads and flat type terminals.
Large nozzles for 2 mm or larger DIA lead
Nozzle in the photo is N60-06
Oval shape nozzles for flat type terminals
Nozzle in the photo is N60-09
Nozzle Quick Changer compatible handle (FR-4003) enables one-action nozzle replacement
Remove 3 screws to replace heating element
A tool box that contains of maintenance tools such as cleaning pins for nozzle and heating core is provided for standard. The box can be set on the top of the unit for the convenience of use.
The new filter pipe is 3 times larger than the previous model and applicable to operation on large components. This is not disposal type and for repeatable use.
When desoldering, flux is also suctioned. Flux can cause degradation of suction performance if it enters inside the pump. To avoid the degradation, filter is attached on the front panel. The new filter is larger than the previous type to enhance greater adsorption property. Also the transparent filter cover makes it easy to check filter condition.
|NEW||Product within 1 year after launch|
|DISCONTINUED||Product discontinued already.
The information in this page is based on the data when it was discontinued.
No update/amendement will be added to the page.
|Product that complies with the regulated values of 10 substances prohibited by the european rohs directive.|
|Based on the electrostatic attenuation test (MIL-STD-3010A Test method 4046), products with a charging voltage of 50V or less as being grounded are considered as ESD SAFE countermeasure products.|
|Recommended for work using lead-free solder.|