Additional option for Auto-Soldering System Camera Unit & Trace app for HU-200
2024/03/22New Products
Camera Unit & Trace app (P/N CX5039) is started selling as an additional option of Auto-Soldering System HU-200
- Please contact with HAKKO or our local retailer for the quotation
Camera Unit
Video recording of soldering conditions
It is possible to record soldering condition on the production by shooting video.
Even if the operator or supervisor is absent, you can check what happened later.
Analysis and all-in-one management with the dedicated application
Recoding starts automatically when the soldering program is started.
Since the dedicated viewer application works with the HU-200 software (HAKKO SOLDERING SYSTEM2) various information such as coordinates, time, temperature and soldering condition can be recorded.
By analyzing the data, you can figure out the cause of the soldering defect as status of it is confirmed by video and picture data.
Creating a simple report from the accumulated data
It's possible to output a simple report in CSV format from the data recorded.
A report in CSV format allows quick sharing and browsing.
Link the serial number printed on the board with barcord reader
By reading the serial number printed on the board etc with the barcord reader, lot number or serial number is appended following by the file name of the recorded data.
The file name follows the order of program name, data storage date, lot and serial number (if included)
Selectable two types of the lens for shooting distance
25 mm
12 mm
The standard lends is 25 mm and the optional lends is 12 mm. You can select whichever is suitable for shooting distance.
25 mm lends is recommended to check the soldering condition and 12 mm wide lends is good for watching soldering and its surrounding area.
Ant-fogging cover glass for lens
The cover lends prevents the lens from fogging by a great amount of flux fume generated by auto soldering.
Easy replacement and maintenance
Easy positioning and strong arm
Adjustable arm with five joints
The arm is adjustable by losing the hexagon socket head cap screws on the joints to set the camera to the position you require.
Camera Unit & Trace app (P/N CX5039)
Packing list
 |
|
- Please contact with HAKKO or local dealer for the quotation
Packing list
|
|
- Please contact with HAKKO or local dealer for the quotation
Specifications
| Part No. | CX5039 | |
|---|---|---|
| Recording format | H.264 , MPEG-4 | |
| Image quality | Select from low, standard, or high * Bit rate can be changed by editing the settings file. |
|
| Temperature recording interval | 0.5 sec | |
| Shooting image size | 1280 × 720, 1280 × 960 | |
| Frame rate | 1280 × 720 : 10, 6, 5, 4, 3, 2, 1 fps 1280 × 960 : 10, 6, 5, 3, 2, 1 fps |
|
| Mounting direction | 5 directions in 45º increments | |
| Focus | Fixed focus | |
| Lens | S-mount | |
| Lens focal length | 12 mm | Focus from 37 mm (from camera edge) Field of view at 37 mm : 7.5 mm × 4.1 mm Field of view at 300 mm : 108 mm × 61 mm |
| 25 mm | Focus from 100 mm (from camera edge) Field of view at 100 mm : 10.5 mm × 6 mm Field of view at 300 mm : 47.5 mm × 27 mm |
|
Click here for the detailed information of Auto-Soldering System HU-200
Auto-Soldering System HU-200