Two optional parts are now available for tip cleaning of the Auto-Soldering System.
Best suited longlife cleaning brush, for the Auto-Soldering System that performs high-volume soldering.
Approximately 21 times longer than the standard brush (Part No.A1567) made of steel.＊
＊Based on our in-house test
Having the cleaner positioning board allows rotating the positioning of the tip cleaner by 90 degrees.
Rotating the position of the cleaner by 90 degrees makes it possible to use not only the Z-axis and θ-axis but also the X-axis during cleaning.
Therefore, cleaning into the deep inside of the groove and on both sides of the tip surface becomes possible, since the tip straddles the brushes in the X-axis direction (right and left).
HU-200 can register multiple cleaning positions to the system.
Then, it is possible to call the multiple cleaning positions arbitrarily by the program.
This function increases the degree of freedom in designating the cleaning position. And by using a metal brush and a silicone brush properly, it is possible to perform a cleaning that achieves both oxide removal and long-life characteristics.
The cleaning positioning board can be attached to the jig table of the Y-axis with the screws provided as the accessories. So, it contributes to shortening the moving distance for cleaning.
Details of Auto-Soldering System HU-200 from here.
Auto-Soldering System HU-200