Vacuum suction pick-up tool

Perfect for the pick-up of various types of electronic components

• Suitable for the pick-up of flat packages, chip resistors, etc.
• Applicable also for the pick-up of sphere-shaped objects and small objects.

Equipped with a built-in pump

• A built-in pump eliminates need for an air supply unit. The unit is operable immediately in any area with a power supply.

High suction power

• Can pick up an object with a weight up to 120 g. (With the use of a 7 mm dia. pad)

Antistatic product

Examples of nozzle and pad combinations and suction power.

Image of combination	Nozzle	Pad	Maximum suction power
	A1165	A1166 3 mm dia.	20 gf
		A1312 5 mm dia.	60 gf (option)
		A1167 7 mm dia.	120 gf
		A1311 10 mm dia.	230 gf (option)
	A1486	A1166 3 mm dia.	20 gf
		A1312 5 mm dia.	60 gf (option)
		A1167 7 mm dia.	120 gf
		A1311 10 mm dia.	230 gf (option)

• A1165 and A1486 are the only applicable nozzles to the pads.
• The maximum suction power varies depending on the surface of the object.

Nozzle single use

Nozzle			Maximum suction power	Application	Mark*2
Bent nozzle	A1164 0.4 mm dia.	Standard accessory	0.6 gf	Chip resistors, other tiny components	「22」
	A1165*1 1.1 mm dia.	Standard accessory	2 gf	Small IC's (8-40 pins)	「16」
Bent nozzle	A1198 0.26 mm dia.	Option	－	0603 chip	「25」
Straight nozzle	A1486 1.1 mm dia.	Option	－	－	「16」

• Please take off the stopper when using A1165 without pad.
• How to distinguish each nozzle

  

How to use/Applications

Suctioning a component by covering the hole on the pen with a finger

It suctions a component, just by covering the hole on the pen with a finger.
The consistent suction power provided by the station type helps pick up a component.

Pick up of 0603 chip component

The 0603 components used in mobile phones are so small that high precision work is required when picking it up with manual tweezers not to lose or miss it. HAKKO 392 offers a fine bent nozzle (A1198 0.26 mm dia. as an option) that can handle the 0603 chip component. HAKKO 392 ensures continuous pick up works.

The pick-up tool is designed to pick up a micro component by suction but not to suction dust. If it is used to suction dust, the filter inside may get clogged and it may cause product failure.