Top of Products > Solder Feeder Auto-Soldering System Soldering Iron Solder Feeder Thermometer / Soldering Tester Tip Cleaner / Iron Holder Solder / Flux Fume Extractor Soldering Pot Desoldering / Rework Rework Station Static Control Vacuum Pick-Up Tool Tool for Lead and Wire Heating Machine / Heating Gun Glue Gun / Sealer Hobby > Solder Feed System > 373
Solder Feeder/Solder Feed System
Amount of solder feed can be controlled by the combination of feed "time" and feed "speed". (Only in AUTO mode)
|AUTO mode||To feed solder in the specified time and at the specified speed once the switch is pressed. (Only in AUTO mode)|
|MANUAL mode||To keep feeding solder at the specified speed while the switch is pressed and held.|
The function to draw back solder by the specified length after feeding is equipped.
It reduces the thermal impact of the high-temperature tip on solder and flux.
Set the appropriate conditions when using the product with an automatic machine.
The combination of the new tube unit and guide pipe assembly (options) achieves the one-handed soldering just like manual soldering, one hand for holding a soldering iron and the other hand for feeding solder wire.
The new tube unit that feeds solder from the underside of the tip is now in the lineup.
Because the new guide pipe assembly is designed to be set at closer to the tip, the size of the iron with it is smaller than the iron with the conventional guide pipe assembly, and it improves the handling of the iron. The one-handed soldering just like manual soldering can be achieved.
The combination of the new tube unit and guide pipe assembly feeds solder from the underside of the tip and makes it possible to obtain "heat-bridge effect" in which molten solder helps heat transfer to enable ideal soldering.
It is the phenomenon that the heat from the tip being transferred quickly to soldering joint area via molten solder.
It is one of the important elements to achieve good soldering.
The maintenance of the new guide pipe assembly is easy because it will have less residue of flux fume and clogging with the residue while feeding solder from the underside of the tip.
The position of solder feeding is critical to soldering quality. The new tube unit makes it easy to adjust the solder feeding position by holding the guide pipe assembly tightly with the two parts.
The installation on a soldering iron is simple and easy.
Tip can be replaced without removing the tube unit and the adjusted guide pipe assembly.
It saves the trouble of adjusting the position of solder feeding.
The tip cleaner FT-720 cleans a tip quickly and surely even having the guide pipe assembly on a handpiece.
The dedicated receptacle makes the conventional iron holder accept the iron with the new guide pipe assembly.
The new type, feeding solder from the underside of the tip, is recommended for improving work efficiency.
For the applicable soldering irons, see the table of the combination for the auto-solder feed system .
The auto-solder feed system with the feeder pen enables the control of amount of solder to feed.
It is useful for any type of soldering iron.
|Usable Solder Dia||0.6/0.65mm||0.8mm||1.0mm||1.2mm||1.6mm|
|Solder Diameter Adjustment Ring||B1626||B1627||B1628||B1629||B1630|
|NEW||Product within 1 year after launch|
|DISCONTINUED||Product discontinued already.
The information in this page is based on the data when it was discontinued.
No update/amendement will be added to the page.
|Product that complies with the regulated values of 10 substances prohibited by the european rohs directive.|
|Based on the electrostatic attenuation test (MIL-STD-3010A Test method 4046), products with a charging voltage of 50V or less as being grounded are considered as ESD SAFE countermeasure products.|
|Recommended for work using lead-free solder.|