Nozzle replacement procedure using a nozzle quick changer

Using the nozzle quick changer allows for quick and safe nozzle replacement.

Nozzle replacement procedure using a nozzle quick changer

1. Insert the nozzle into the replacement enclosure pipe and set it in the receptacle of the quick changer.

   

   

   Align the convex part of the enclosure pipe with the groove (guide) on the receptacle.

   

   When using an oval nozzle, first attach the oval nozzle positioning jig to the receptacle, and then set the replacement enclosure pipe and nozzle.

   

   

   

   By adjusting the orientation of the oval nozzle positioning jig attached to the receptacle, the orientation of the nozzle to be attached to the handpiece can be specified.

   

   

   

2. Remove the nozzle and enclosure pipe.

   Insert the handpiece into the receptacle and rotate it 45 degrees counterclockwise to detach the nozzle and enclosure pipe from the handpiece.

   

   

   

3. Attach the nozzle and enclosure pipe.

   Insert the handpiece into the receptacle at a 45-degree rotated position, and then rotate it 45 degrees clockwise to attach the nozzle and enclosure pipe to the handpiece.

   

   

   
   

Changing nozzles according to the workpiece improves work quality and efficiency.