Products

Sealer / Glue Gun / Hot air blower/Portable sealer

HAKKO FV-803

HAKKO FV-803イメージ

Available in:

  • Japan
  • RoHS
  • Portable sealer that allows the sealing of aluminum-evaporated bags with a maximum seal width of 5mm
  • Changes of lamp colors indicate progress of work procedure, enabling any user to achieve neat a finish
  • The sealer enables users to seal sterilized bags with their film sides facing up, allowing them to keep eyes on the contents
Contact Us
Catalog
Manuals / MSDS / Engineering documents
  • Features
  • Packaging List / Specifications
  • Soldering Tip / Nozzle
  • Replacement Parts / Option
  • Maintenance

Features

A sealer that's portable but can even seal the thicker bags used for tea, coffee beans, and health foods!
Lamp colors indicate progress of work procedure.
· Easily provides anyone with a skillful finish. (1) Press the handle. (2) During heating, lamp is lit in red. (3) During cooling, lamp is lit in green. (4) When sealing is completed, the lamp turns off.
Sealable bags: Max. seal width: 5mm; Max. seal length: 200mm; Max. bag thickness: 0.4mm (aluminum-evaporation bag, gazette bag, etc.).
· Other HAKKO sealers
HAKKO FV-801: Max. seal width: 5mm; Max. seal length: 350mm; Max. bag thickness: 0.4mm
HAKKO FV-802: Max. seal width: 1.6mm; Max. seal length: 200mm; Max. bag thickness: 0.2mm
Easy to use for packaging presents and wrapping small items
· Packaging can be performed in homes, stores, etc.
· Can also be used with roll films.
Sealing-only type
Example: 2-way left or right routingCompact size does not require a lot of space.
· 100 (W) x 250 (H) x 400 (L) mm
· Routing direction of power cord can be selected.
Options
· Seal guide···Enables a seal margin to be kept at a constant 8mm.
· Cutter assembly···Can cut roll films.
Options

Usage/Applications

Continuous use in short cycles will cause malfunctions. For continuous use, allow and interval of 15 sec. or longer between sessions.
Operating procedure <For adhesion>
1. Setting before sealing 1. Setting before sealing
Set the heating time adjusting knob according to the material and thickness of the package film, and adjust the sealing position.
2. Heating (Lamp is lit in red.)

2. Heating (Lamp is lit in red.)
When the handle is pressed down, the lamp is lit in red.
the lamp is lit in red.

3. Cooling (Lamp is lit in green.) 3. Cooling (Lamp is lit in green.)
Check that the lamp has turned green while continuing to press down the handle. The lamp is lit green.
The lamp is lit green.
4. When the lamp goes out, it means that sealing has been completed. 4. When the lamp goes out, it means that sealing has been completed.
Raise the handle to check finished conditions.


Options: How to use?
・ Seal guide・・・Enables the seal margin to be kept at a constant 8mm.
・ Cutter assembly・・・Can cut roll film.
Seal guide Cutter assembly
Caution: Be careful not to cut your finger, etc. when using the cutter.


Heat adjustment table for adhesion
Material Polyethylene Polypropylene Aluminum evaporated or other types of laminate films
Scale 1

-

    
Scale 2 0.1mm or less    
Scale 3 0.2mm or less 0.06mm or less  
Scale 4 - 0.08mm or less 0.3mm or less
Scale 5 -   0.4mm or less
Scale 6 -    
*The thickness values shown are the total of 2 layers or more.
*The values in the above table are reference values. The actual value will vary according to the material and voltage. Adjust the setting to the optimum value.