 |
 |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
Greater increase in power SMD Rework Station with Vacuum Pickup
|
 |
Rework System blowing hot air at MAX 500°C
Enables to combine with Preheater (HAKKO FR-820) |
 |
Upgraded power MAX 500°C/930°F for lead-free soldering
|
|
|
Upgraded working efficiency combined with Preheater (HAKKO FR-820)
·Operating HAKKO FR-820 with buttons of FR-803B
·Shorten operating time by heating SMD components from top and bottom
·Automatically cool down after turning off the power
·Easy attachment with included connecting cord
|
|
|
3-Step Temperature setting
·Protect SMD components by setting temperature and time on Step 1-3(Set range Temperature:100 to 500°C/200 to 930°F, Time: 0 to 300 sec. (0 to 5 minutes))
·Automatic cool-down function works after Step 3(at AUTO Mode)
·Enables to register 50 profile data
-AUTO Mode allows control temperature, air-flow, and time.
|
|
Vacuum pickup is built-in
 |
|
Comes with an offset function |
|
|
Power saving function(30min/60min/∞ can be selected) |
|
|
Card lock function to lock the setting details
|
|
ESD safe by design |
|
Control hot air temperature with Temperature Probe (equipped with HAKKO FG-101, HAKKO FG-100) |
|
Controlling the temperatures of Hot Air Rework System and workpiece using the Temperature Probe
Measure temperatures of Hot Air Rework System and workpiece using the
Temperature Probe for Hot Air Rework System (No. C1541) and thermometer
(HAKKO FG-100/HAKKO FG-101) to protect the workpiece.
|
| |
 |
| |
|
| |
|
 Profile graph of 3-Steps |
 |
|
| Part No. |
Packing List |
| No.FR-803B |
Main Unit (HAKKO FR-803B Station), Power Cord, Handpiece Holder, Control Card, Vacuum Pipe Control Knob (L), Connecting Cord, Instruction Manual: 1pc each
Pad (O3mm(0.12in.), O5mm(0.20in.), O7.6mm(0.3in.): 2 pieces each
|
 |
This product does not include a nozzle. When purchasing this product, be sure to order a nozzle suitable for the work. |
| Power Consumption |
100V-310W, 110V-370W, 120V-440W, 220V-590W,230V-650W, 240V-700W |
| Power Consumption |
100V 30W
110-120V 40W
220-240V 50W
(Standby, 100-120V 4W, 220-240V 4W)
|
| Capacity |
5L/min to more than 20L/min |
| Control temperature |
100~500°C /200~930°F (Sensor)
|
| Modes |
Manual / Auto |
| Timer |
50 files / 3 steps |
| External dimensions |
160(W) x 145(H) x 230(D)mm/6.3 x 5.7 x 9.1in.
|
| Weight (Station) |
5kg(11.02lb) |
| Power Consumption |
100V-280W 110-330W 120V-400W 220V-540W 230V-600W 240V-650W |
| Total Length (w/o cord) |
200mm/7.9in. |
| Weight (w/o cord) |
200g/0.44lb. |
|
| Part No. |
Name |
| A1520 |
Pad Ø3mm/0.12in. (set of 5 pieces) |
| A1439 |
Pad Ø3mm/0.20in. (set of 5 pieces) |
| A1438 |
Pad Ø7.6mm/0.30in. (set of 5 pieces) |
| Optional
nozzles for Hakko 850/850B/852/FR-801/FR-802/FR-803B |
|
 How to use
 |
When should the optional Temperature Probe for Hot Air Rework System(No. C1541) be used? |
| The Temperature Probe for Hot Air Rework System (No. C1541) is equipped with 2 types of sensors. Before measuring temperatures as follows, connect the sensor to the thermometer. |
| Sensor A: |
When measuring the temperature of hot air blown from the nozzle:
Correcting thermal control can be made by confirming the temperature of the hot air that is actually blown.
|
| Sensor B: |
When measuring the temperature of applicable parts (workpieces):
Rework can be performed without causing damage to the parts being reworked (QFP, etc.)
|
|
|
|
|
|
|
|
