 |
 |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
Vacuum pump type desoldering tool with soldering capability
Nozzles for HAKKO FM-204 depend on the market.
|
 |
| Even easier-to-use FM Series Desoldering Tool |
 |
Vacuum pump type desoldering tool
|
| |
Excellent thermal recovery |
| |
·The integrated nozzle containing both heating element and sensor provides higher thermal recovery than conventional tips. (Refer to graph.) |
| |
Soldering work is possible by replacing the handpiece.
|
| |
Connectible handpieces:
- Desoldering handpiece (HAKKO FM-2024)
- Soldering iron (HAKKO FM-2027)
- N2 soldering iron (HAKKO FM-2026) |
| |
Selectable grip |
| |
Two-way use of gun type and straight type is available.
 |
 |
| Gun configuration |
Straight configuration |
|
| |
Easy maintenance |
| |
Filter pipe replacement:
- Disposable paper filter pipe
- Easy to dispose of paper and solder separately
Nozzle replacement:
- Safe to replace with nozzle remover
- Replaceable even before the end of nozzle has cooled down
 |
 |
 |
| (1) Detach the nozzle remover |
(2) Firmly attach the nozzle remover to the nozzle cartridge as shown in the picture. |
(3) Pull the nozzle remover with the nozzle cartridge in one stroke. |
|
| |
Power save function
Sleep function:
When the handpiece is placed on the Iron Holder (FH200-01/FH200-02), the sleep function operates and decreases the unused tip temperature up to approximately 200°C , preventing the tip from being oxidized.
In addition, this function can relieve the loads applied to the tip due to the high-temperature settings required for lead-free soldering
* The connecting cable enables the iron holder and temperature controller to be activated.
|
| |
Auto power shut-off function:
By connecting the iron holder (HAKKO FH-200) to the connecting cable, the auto power shut-off function is activated in the same manner as the sleep function.
- Selectable buzzer and alert ON/OFF setting
Buzzer and alert sound generation upon error and when reaching the setting temperature can be selected.
ON/OFF-settable buzzer sound
|
 Thermal Recovery Graph |
|
| Model No. |
Packing List |
| FM-204 |
1. Main unit (HAKKO FM-204 station)
2. Iron holder (No. FH200-05; with tip cleaner)
3. Ceramic paper filter (10pcs.) (for replacement)
4. Cleaning drill (for heating element)
5. Filter pipe assemblies (2pcs.) (originally equipped to the unit and one for spare*5)
6. Control card
7. Desoldering tool (Model FM-2024)
8. Connecting cable
9. Nozzle remover
10. Handle (for gun configuration)
*11. Power cord
*12. Instruction manual
*13 Tip tray
*No photos are shown for parts *5,*11, *12 and *13.
|
| * This product does not include a nozzle. When purchasing this product, be sure to order a nozzle suitable for the work. |
| Power Consumption |
120W |
| Range Temperature |
200 to 450°C |
| Thermal Stability |
±5°C (±9°F) at idle temperature |
| Output Voltage |
24 V |
| Dimensions |
160(W)×120(H)×225(D)mm |
| Weight |
3.7 Kg |
| Vacuum Generator |
Vacuum pump, Double cylinder type |
| Vacuum Pressure (Max.) |
80kpa(600mmHg) |
| Suction Flow |
15L/min |
| HAKKO FM-2024 Desoldering tool |
| Power Consumption |
70W(24V) |
| Range Temperature |
350 to 450°C |
| Tip to Ground Resistance |
<2Ω |
| Tip to Ground Potential |
<2mV |
| Total Length (w/o cord) |
180mm (with Φ 1.0mm nozzle) |
| Weight (w/o cord) |
65g(with Φ 1.0mm nozzle) |
| Cord |
1.2m |
|
|
|
|
|
|
