HAKKO

Search

Lineup

Top of Products  >  Static Control Auto-Soldering System Soldering Iron Desoldering / Rework Preheater Soldering Pot Thermometer / Soldering Tester Fume Extractor Solder / Flux Static Control Tool for Lead and Wire Shrink Packaging / Heating Gun Glue Gun / Sealer Hobby  >  Static Level Meter  >  FG-450

Static Control/Static Level Meter

FG-450

FG-450
POINT
  • Portable static level meter for the measurement of electric potential for films and plastic objects
  • Useful for the check of electric potential measurement in production lines
  • Also suitable for the operation test of static eliminators and static potential check for computers

Available in:

  • Japan
  • North America
  • Europe
  • Oceania
  • Asia
  • Other Countries

FG-450

Portable Static Level Meter, easily measured anywhere with Rotating Sensor Head.

Rotating Sensor Head enables you to read the measurement value easily at any pointing angle.

  •  Rotates 180 degree by 45 degree increments

Portable Static Level Meter, easily measured anywhere with Rotating Sensor Head. image

Two modes for measuring electric potential:

  •  Electric Potential Measurement
    Momentary and peak value of static electric potential.
    Human body static electric potential, which can be measured hard in general, can be easily measured with Option Charging Level Measurement Plate for Body attached to the unit.
    * Measurement for the charged object.
    * Measurement value can be hold temporarily by pressing Hold Button.
  •  Ion Balance Measurement for Ionization Equipment FE-510 etc.
    * Ion balance of the object cannot be measured.
Measurement Example of Electric Potential for Object. image

Measurement Example of Electric Potential for Object.
(Resolution: 10 V)

Measurement Example of Ion Balance image

Measurement Example of Ion Balance
(Resolution: 1 V)

Measurement Example of Electric Potential for Body image

Measurement Example of Electric Potential for Body
(Resolution: 10 V)

The unit of measurement value on display is ‘kV’.

If the result of measurement is 10 V, the value on display shows ‘0.01 kV’ in case of static electric potential.
If the result of measurement is 1V, the value on display shows ‘0.001 kV’ in case of ion balance.

The distance between the sensor and the charged object should be 30 mm.

Easily adjusts the distance by Red LED mark pointing at the charged object.

The red light Image is projected at about 30mm.

Adjusts Zero Point easily with just a single touch of a button.

Battery indicator informs you the replacement timing of battery.

When the battery charge icon shows one unit left on display, replace the battery.

  • If you do not intend to use this device for an extended length of time, remove the battery.