Support

Maintenance / Troubleshooting / Application Examples

Tips for using the No. 804 and 805 units for a long time
HAKKO melter maintenance method Top
POINT 1 Do not lay the unit down during use or shortly after use.
POINT 2 Do not pull out the adhesive stick forcibly before it is used up completely.
POINT 3 Do not pull the trigger forcibly.
POINT 4 Remove dirt and dust stuck on the adhesive stick before use.
POINT 5 Use adhesive types having material characteristics, dimensions and viscosity suitable for No. 804/805.
POINT 6 Disconnect the power plug when the unit will not be used for 20 min. or more.
POINT 7 When replacing the nozzle with a new one, use a spanner. (No. 804)

POINT 6.
Disconnect the power plug when the unit will not be used for 20 min. or more.

If the unit is left unused for a long time with the power turned on, the adhesive stick may be heated excessively, causing dangerous conditions.

Disconnect the power plug when the unit will not be used for 20 min. or more.