- Home
- Support
- Maintenance / Troubleshooting / Application Examples
- Maintenance and inspection of soldering pots
Maintenance / Troubleshooting / Application Examples
|
Soldering Pot Maintenance and Inspection Method |
||||||||||||||||||||||||||
![]() |
||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
| Point 2-a. | Method for setting correct temperature (offset value) <For HAKKO FX-301> |
|||||||||||||||||||||||||
|
HAKKO FX-301 is equipped with a digital indicator of pot temperature to enable correct temperature control. Temperature measurement method Connect the temperature probe (No. A1310) for solder pot to the HAKKO FG-101/HAKKO FG-100 and insert the end into the center of the solder in the pot to measure the temperature.
Offset value setting method The temperature indicated on the FX-301 and the measured temperature are sometimes different depending on the work environment. In this case, change the offset value. |
||||||||||||||||||||||||||
| Point 2-b. | Method for setting correct temperature <For HAKKO FX-300> |
|||||||||||||||||||||||||
| HAKKO FX-300 is an analog-type soldering pot in which temperature is adjusted by turning a knob. Knob temperature indication
Temperature measurement method Connect the temperature probe (No. A1310) for soldering pot to the HAKKO FG-101/HAKKO FG-100, and insert the end into the center of the solder in the pot to measure the temperature.
|
||||||||||||||||||||||||||











