Soldering Pot Maintenance and Inspection Method |
 |
|
|
|
Point 2-a. |
Method for setting correct temperature (offset value)
<For HAKKO FX-301> |
HAKKO FX-301 is equipped with a digital indicator of pot temperature to enable correct temperature control.
Temperature measurement method
Connect the temperature probe (No. A1310) for solder pot to the HAKKO FG-101/HAKKO FG-100 and insert the end into the center of the solder in the pot to measure the temperature.
Offset value setting method
The temperature indicated on the FX-301 and the measured temperature are sometimes different depending on the work environment. In this case, change the offset value.
|
|
|
Point 2-b. |
Method for setting correct temperature
<For HAKKO FX-300> |
HAKKO FX-300 is an analog-type soldering pot in which temperature is adjusted by turning a knob.
Knob temperature indication
 |
The knob temperature indication is a reference temperature. Note that actual temperature may vary depending on individual product differences and usage methods. |
| Knob |
Reference temperature |
| 50mm x 50mm square pot |
75mm x 75mm square pot |
| 1～3 |
Approximately 200°C (400°F) |
Approximately. 200°C （400°F） |
| 3～4 |
Approximately 300°C (570°F) |
Approximately. 300°C （570°F） |
| 4～5 |
Approximately 400°C （750°F） |
Approximately. 350°C （660°F） |
| 5～6 |
Approximately 450°C （840°F） |
Approximately 380°C （720°F） |
Temperature measurement method
Connect the temperature probe (No. A1310) for soldering pot to the HAKKO FG-101/HAKKO FG-100, and insert the end into the center of the solder in the pot to measure the temperature.
|
