TOP > Product Tips > Maintenance Method for DASH/455/456

Maintenance Method for
DASH/455/456 Soldering Irons
Tips for extending the life of the soldering iron
If a failure phenomenon occurs
Top page for Maintenance Method for DASH/455/456 Soldering Irons
Point 1 Pull out the plug from the wall socket if not using the soldering iron for a long time.
Point 2 If consumable parts such as the element cover, nut, etc. are oxidized, replace them with new parts.
Point 3 When placing the soldering iron on the iron holder during work, leave the tip applied solder.
Point 4 After work, be sure to apply new solder to the tip before storing.
Point 5 To prevent burning on, periodically loosen the nut and repeatedly insert and pull out the element cover and tip.
Point 6 Use only the specified tips.

Point 6. Use only the specified tips.

If a tip for another model is used, the heating element will be broken and the temperature will be unstable.

In particular, the tip for HAKKO DASH is very similar in appearance to the tip for HAKKO 907. Recheck the part number of the tips that you currently have.


The HAKKO logo mark and part number is engraved on the HAKKO soldering tip.
Top of page
PRIVACY POLICY | SITE MAP