TOP > Product Tips > Maintenance Method for DASH/455/456

Maintenance Method for
DASH/455/456 Soldering Irons
Tips for extending the life of the soldering iron
If a failure phenomenon occurs
Top page for Maintenance Method for DASH/455/456 Soldering Irons
Point 1 Pull out the plug from the wall socket if not using the soldering iron for a long time.
Point 2 If consumable parts such as the element cover, nut, etc. are oxidized, replace them with new parts.
Point 3 When placing the soldering iron on the iron holder during work, leave the tip applied solder.
Point 4 After work, be sure to apply new solder to the tip before storing.
Point 5 To prevent burning on, periodically loosen the nut and repeatedly insert and pull out the element cover and tip.
Point 6 Use only the specified tips.

Point 5. To prevent burning on, periodically loosen the nut and repeatedly insert and pull out the element cover and tip.

Note that each part remains very hot shortly after soldering work is finished. Perform the following work after each part has sufficiently cooled down.

Maintenance to Prevent Burning on 1.Lossen the nut. 2.Move the element cover up and down. 3.Move the soldering tip up and down.
Top of page
PRIVACY POLICY | SITE MAP