TOP > Product Tips > Maintenance Method for DASH/455/456

Maintenance Method for
DASH/455/456 Soldering Irons
Soldering Iron HAKKO DASH Soldering Iron HAKKO 455·456
HAKKO DASH
HAKKO 455/456
Tips for extending the life of the soldering iron
If a failure phenomenon occurs


For extending the life of the soldering iron Point 1 Pull out the plug from the wall socket if not using the soldering iron for a long time.
Point 2 If consumable parts such as the element cover, nut, etc. are oxidized, replace them with new parts.
Point 3 When placing the soldering iron on the iron holder during work, leave the tip applied solder.
Point 4 After work, be sure to apply new solder to the tip before storing.
Point 5 To prevent burning on, periodically loosen the nut and repeatedly insert and pull out the element cover and tip.
Point 6 Use only the specified tips.

If a failure phenomenon occurs Case 1 The tip is not heated sufficiently.
Case 2 A new tip cannot be inserted into the heating element.


Top of page
PRIVACY POLICY | SITE MAP