| 1 / 2 / 3 |
| N2 gas and preheating effect improves the solderbility greatly! |
|
If in trouble because of the poor solderbility of lead-free solder, HAKKO N2 System can be brought to the settlement. (Click here for set example.) |
|
| 1. Preheating effect
|
The preheating effect is achieved by passing Nitrogen gas along the heating element in the hand piece.Soldering can be done on multilayer PWB and high density PWB sensitive to heat without raising the temperature of the tip excessively, even when the melting point of lead-free solder is high.
|
| 2. Improvement of wettability and spreadability
|
By using the HAKKO N2 System, the wetting and spreading are excellent for eutectic solder, lead-free solder and high-temperature solder, comparing with our conventional soldering iron. This feature prevents failed soldering due to bridges while producing great effect on repair works.
|
|
|
|
|
| 3. Preventing oxidation
|
Oxidization of solder and soldering tip can be prevented by using Nitrogen gas, which passes along the nozzle ass'y uniformly.
|
| [Set example]
|
|
Example1
N2 Gas Generator:
HAKKO FX-780 Connectable with all models of N 2 soldering irons
Flowmeter:
HAKKO FX-791 Connectable with all models of N 2 soldering irons |
|
 |
Example2
N2 Gas Generator:
HAKKO FX-780 Connectable with all models of N 2 soldering irons
Flowmeter:
HAKKO FX-791 Connectable with all models of N 2 soldering irons |
|
 |
Example3
N2 Gas Generator:
HAKKO FX-780 Connectable with all models of N 2 soldering irons
Flowmeter:
HAKKO FX-791 Connectable with all models of N 2 soldering irons |
|
There is another N2 soldering iron, HAKKO 953. |
){kind=link}